Slim Titan

SLIM TITAN is the new line of instrument panels for all applications requiring compact size and max. flexibility, along with high performance.
Thanks to its minimalistic design, panel fits in every dashboard perfectly.
Capacitive touch screen based on an intelligent algorithm, guarantees fast response, even when wearing protection gloves.

Technical specification:

  • Operating voltage: 8 – 32 Vdc, protected against reverse polarity and load-dump
  • Operating temperature: from -20°C to +70°C
  • Material: PC-ABS
  • IP level: 65
  • CPU:  CORTEX R4
    •  ARMv7 and Thumb-2 instruction set compliant
    •  2D graphics engine with base level hardware acceleration
    •  Four display layers of overlay, constant alpha, or alpha from pixel data for blending each layer
  • Memory:
    • FLASH 2Mb internal + 4Mb external SPI
    •  VRAM 1MB embedded SRAM video memory
    •  EEPROM 512Kbit
  • LCD TFT display:
    • Format WVGA 16:9
    • Resolution 800 x 480px
    • Capacitive touchscreen
    • Orientation Landscape or portrait
    • Backlight LED 450cd/m²
    • Contrast ratio 500
  • Inputs:
    • 19 x Digital, programmable active low or high via FirmWare
    • 1 x Digital, with internal pre-heating resistor – 150R or 75R (HW setting by AMA)
    • 4 x Resistive (with internal 1K pull up resistor)
    • 4 x Frequency (0 – 10Khz) – universal input for NPN, tachometer alternator signal
    • 2 x 4-20mA analog
    • 2 x 0-10V analog
    • 2 x CANBUS 2.0 type A and type B up to 1Mbps (ISO 11898 standard)
    • 2 x Video (PAL/NTSC)
  • Outputs:
    • 4 x HSD 2 A (sum of load currents; with internal HW safety watchdog controller)
    • 1  x 5V 100 mA (for supply external sensor)
  • 1 internal real time clock (RTC) with lithium battery backup
  • 1 internal Bluetooth module (optional) – fully certified Bluetooth® version 4.1
  • CAN protocol SAEJ 1939
  • option of mounting via RAM-mounts or integrated into dashboard via AMA bracket
  • Programmable in C/C++ and EDASH3K (with some limitations)
  • CAN bootloader for FirmWare upgrade